Mnoho otázek již mohlo být zodpovězeno v naší databázi znalostí. Než nás kontaktujete, podívejte se do ní a získejte odpovědi.
Znalostní báze
X-Plane.to je platforma, kterou si můžete vybrat, pokud jde o doplňky, modifikace a livreje pro X-Plane 12. Nezáleží na tom, zda jsou placené nebo zdarma: Pokrýváme je všechny.
O nás
Od aktuálních informací vás dělí jediné kliknutí.
This is a script that allows you to switch the engines made by Carda Jowol for the default A330. They have been made by Carda Jowol originally for the Jar Design A330 and have been modified by Southwest_aviation in order to make it...
This is a script that allows you to switch the engines made by Carda Jowol for the default A330. They have been made by Carda Jowol originally for the Jar Design A330 and have been modified by Southwest_aviation in order to make it fit to the default A330-300 of X-Plane 12.
An installation Manual comes with the zip file.
Get the Carda Jowol engines modified by Southwest_aviation here:
https://forum.thresholdx.net/files/file/2284-default-a330-carda-pwge-engine-mod-configuration-files
1.0.2
15.02 MB
1,646
Aktualizováno na verzi 1.0.2
Initial File Release
Povolení k nahrávání
Tento soubor nesmíte v žádném případě nahrávat na jiné stránky.
Povolení k úpravám
V žádném případě nesmíte můj soubor upravovat nebo vylepšovat.
Povolení ke konverzi
Tento soubor nesmíte v žádném případě převádět.
Povolení k používání majetku
Za žádných okolností nesmíte používat aktiva mého souboru.
© Greyfoxx - All rights reserved. Jakékoli další nahrávání nebo šíření tohoto souboru bez předchozího písemného souhlasu autora je zakázáno. Tento Flight Simulator 2020 Mod byl vytvořen Greyfoxx and shared in Aircraft Liveries » Airbus A330-300 pro X-Plane 12.
První verze tohoto souboru byla právě spuštěna. Vítejte na palubě!
Máte otázky? Zde naleznete řešení.
Je tu docela prázdno.
Je tu docela prázdno.
Tito uživatelé přispěli na Greyfoxx aby i nadále vytvářel úžasné doplňky, které si každý může užít.
These add-ons may be required or recommended to use.
Je tu docela prázdno.
| 
tranadasteve
Thank you for this! Even got it to work on the A330-200. For those of you wondering how, copy the data refs and objets from this .acf file to the -200 .acf file.
iasi3 3 month(s) ago
how did you do that, with excel? because if I copy the carda one the wings are still in the position of the -300 and not the -200. Is there specific steps you could provide please? Thanks in advance
tranadasteve 3 month(s) ago
get the carda download from the threshold link above and copy and paste the GE & PW folders into the objects folder in your a332 folder / copy and paste the sasl folder in this download and put it into the plugin folder in your a332 folder / look at the .acf file from this download and copy the data refs from the GE and PW engines / open up plane maker and press add 10 times in the objects section and put in those data refs you copied from the .acf from this download / add a333/engines/default under the Trent engines / done
Soarandskor 3 month(s) ago
Hi, what coordinates do you use for the engines? I got the switcher working but the engines are stuck at the front of the plane
MikeYVR
can someone explain how to install the switcher on the -200 mod
sofiane330
Honestly, I didn't understand anything about the installation, I tried everything.
Who could help me please?
Greyfoxx 7 month(s) ago
You have to download the Carda engines from the link in the Manual and paste the content into your copy of the default A330 folder. After that, copy everything from the switcher-mod (the plugins folder and the A330.acf into your A330 folder as well. That's it.
PilotB1738
Any way for this to work with x-works 200's also this would be cool for the toliss family and cardas mods.
Greyfoxx 10 month(s) ago
Yes. You can add these engines (both of them) to your A332 in Planemaker with the "Objects" tab, and connect each engine (also in Planemaker in the "Objects"-tab) to the following killdatarefs:
a333/engines/pratt
a333/engines/ge
a333/engines/default
dearste 7 month(s) ago
can u explain better this steps?
thommy24dd
would it be possible to make those script for Rotate MD11GE/PW or and Felis B747 Classic PW/GE ?
Greyfoxx 10 month(s) ago
Possible, yes. But I don't own these planes and I would only buy them to make this mod for them. I am vurrently more focusing on updating the A330neo mod for XP12.
thommy24dd 10 month(s) ago
okay, its understandable. I adapted your switcher for the X-Works A330-200 Mod and it is also working 😊
rafapiloto195 8 month(s) ago
How did you do it?
SpotBot
When I switch engines nothing happens, What do i do?
Greyfoxx 11 month(s) ago
If your menu is greyed out you have to turn off the batteries. The plugin is supposed to make the menu unavailable as long as the batteries are on. This is intended to prevent the engines from being switched while you are operating the aircraft.
wfwool4835 11 month(s) ago
Now works Cheer's.
SpotBot 11 month(s) ago
Is this mod supposed to change the engine model visually?
Greyfoxx 11 month(s) ago
Yes
wfwool4835
How do you install the engines?
Greyfoxx 11 month(s) ago
Download the engines from the Link in the description and put the folders "GE Engines" and "PW Engines" into the objects-folder of your copied A330-300, then put the content from the zipfile of the Engine switcher mod into your A330-300 folder as well. Overwrite when promted.
thommy24dd
Thank you so very much for your nice work!
alberto767
thank you
is nice to have all the engines in one acf file
Now we need all the engine sound
I mean the GE CF6 sound, the RR sound and the PW sound